Futurelight pcc +. Futurelight pcc pcc , Color Changer from Futurelight. Write a user review · Product presentation. User reviews. Price engine. Extremely powerful colour-changer * DMX-controlled operation or stand alone operation with Master/Slave-function * 48 preprogrammed scenes in Program. We sell used & new PCC PRO Color Changers by FutureLight. Select from the best prices and availability in the world.
|Published (Last):||9 August 2010|
|PDF File Size:||7.17 Mb|
|ePub File Size:||8.24 Mb|
|Price:||Free* [*Free Regsitration Required]|
Don’t show me this message again.
Future Light PCC-1200 User Manual
The installation must always be secured with a secondary safety attachment, e. Table of Contents Add to my manuals Add. Page 11 PCC will respond to the controller. If you set, for example, the address to channel 4, the PCC will use the channel 4 to 6 for control. Unplug from mains before! The lamp life given by the manufacturer must never be exceeded. Overhead Rigging Overhead rigging The installation of the projector has to be built and constructed in a way that it can hold 10 times the weight for 1 hour without any harming deformation.
PCC will respond to the controller.
Pictures and images Futurelight pcc – Audiofanzine
Page 15 AUTOi. The arising condensation water might damage your device.
The occupation of the connection-cables is as follows: Copyright Keep this manual for future needs! You will see you have acquired a powerful and versatile device. Connection With The Mains 3 mm at every pole has to be included in the permanent electrical installation. Cleaning And Maintenance times, it will detect whether the fixture has more than 3 errors. Page 3 If the device has been exposed to drastic temperature fluctuation e. Don’t have an account? If the device has been exposed to drastic temperature fluctuation e.
This device is designed for professional use, e. In this way you can stop the colour-wheel in any position.
Only install the lamp with the device switched off! This secondary safety attachment must be constructed in a way that no part of the installation can fall down if the main attachment fails.
Connect the fixture to the mains with the power-plug. Leave the device switched off until it has reached room temperature. The lamp has to be replaced when it is damaged or deformed due to the heat! The main menu is accessed by pressing the Enter-button for 3 seconds until the display starts flashing.
This product is only allowed to be operated with an alternating voltage of V, 50 Hz and was designed for indoor use only.
Control Board The Control Board offers several features: Guarde este manual para posteriores usos. Page of 22 Go.
Color-wheel error This message will appear after the reset of the fixture if the magnetic-indexing circuit malfunctions sensor failed or magnet missing or the stepping-motor is defective or its drive circuit on the Lighting effects are not designed for permanent operation.
Futurelight pcc – Audiofanzine
Overhead rigging The installation of the projector has to be built and constructed in a way that it can hold 10 times the weight for 1 hour without any harming deformation. This is why you need to take notes on the operational time of the lamp and replace the lamp in time.
During the Reset, the motors are trimmed and the device is futureight for use afterwards. Adjust the desired inclination-angle via the mounting-bracket and tighten the fixation screws.
Please make sure that there are no obvious transport damages. Got it, continue to print. If the fixture has more than 3 errors including 3 errorsall the channels can not work properly; but if the fixture has less than 3 errors, only the channels which have errors can not work properly, others can work as usual.
Lighting effects must not be connected to dimming-packs. By pressing ‘print’ button you will print only current page. A safety rope which already hold the strain of a crash or which is defective must not be used again. Keep exchanged lamp in a protective container and remove accordingly. Enter text from picture: Browse through the menu by pressing the Up-button.
To print the manual completely, please, download it. Error Messages – Editing the channels of the individual scenes With this function you can edit the program to be called up in Run. Comments to this Manuals Your Name. T 4 A, V Fitting lamp: Page 9 A safety rope which already hold the strain of a crash or which is defective must not be used again. DMX-protocol Control channel 1 – Colour-wheel 1 Linear colour change following the movement of the slider.